24V DC Brushless Gear Motor Small Size with Metal Gears, 150rpm High Torque and Low Noise - Durable 24 Volt Permanent Magnet for Micro Machines, Fans, and Automation (300rpm/min)

Item Type: DC Gear MotorModel: XD-42GA755Material: CopperOutput Shaft Size: Approx. 8 x 20mm / 0.3 x 0.8inInsulation Resistance: After the rated operation of the motor under normal temperature and humidity, when measuring the insulation resistance between the coil and the motor shell with a DC500V resistance meter, it does not exceed 20MΩInsulation Withstand Voltage: After the rated operation of the motor under normal temperature and humidity, 50Hz or 60Hz is applied between the coil shells for one minute, and the abnormality is 1500V.Temperature Rise: It is normal to install a gear box or equivalent heat sink and conduct rated operation under normal temperature and humidity by using the resistance to measure the temperature rise of the coil below 70℃Insulation Class: Class B(130℃)Operating Environment Temperature: Motor: -10~+40℃ (no icing)Use Environment Humidity: 85% or less (no condensation)CW/CCW: YesSpeed Adjusted: YesModel Voltage（DC/V） No-Load Speed (rpm/min) No-Load Current(A) Load Speed (rpm/min) Loading Moment（kgf·cm） Reduction Ratio（1:00） Power（W） XD-42GA755 24V 100 0.27 93 4.58 50 25 150 0.27 128 3.06 33 25 200 0.27 175 2.29 25 25 300 0.27 245 1.53 16.6 25 500 0.27 435 0.92 10 25 600 0.27 535 0.76 8.3 25 Notes: 1 Overload and Locked Rotor: When the motor is running, it generates heat due to the energy conversion that occurs inside the coil and the iron core, and the temperature gradually rises. The load is within the rated range, and the heat generation and heat dissipation are balanced, and the coil of the motor will not be burnt. However, it will cause heat under overload and locked-rotor conditions. When the running time is too long, the insulating film on the enameled wire of the coil is dissolved, causing a short circuit between the enameled wires and burning the motor.2 When Running at Low Speed: For DC motors, carbon brushes

• [HIGH TORQUE PERFORMANCE]: Features all-metal gears and pure copper coils in stator and rotor, enhancing torsion and conductivity for stable, powerful operation at 150rpm, ideal for precision micro machines and automation requiring consistent low-speed output.
• [PREMIUM MATERIALS]: Constructed with two high-performance magnets boasting high remanence and coercivity, combined with pure copper windings, ensuring superior magnetic energy, durability, and extended motor lifecycle in demanding applications.
• [SAFETY PROTECTION]: Integrated automatic current cutoff at 3A prevents motor overheating and burnout, increasing reliability and service life during continuous operation, making it safe and worry- for various electrical device uses.
• [QUIET AND EFFICIENT]: Lubricated with high-temperature grease on the gears, this motor operates with minimal noise and low friction while maintaining a slow temperature rise, for residential and commercial environments requiring quiet performance.
• [VERSATILE APPLICATIONS]: Ideal for 24V DC brushless motor uses in circulating fans, humidifiers, air fresheners, smart door locks, engraving, textile and printing machinery, offering excellent adaptability for industrial and household micro machine solutions.